Give Laboratory Data a Larger Shared View
A purchase discussion becomes more useful when it starts with the work that must happen at the screen. In indoor laboratory data-review and equipment-observation desks, a 27-inch industrial LCD monitor can present charts, instrument outputs and reference media from a separate workstation. The a large viewing surface with Full HD or UHD options gives this product a clearer role than a generic screen specification.
The LCD and input electronics form one display assembly, while computing remains in the external host. This distinction prevents buyers from expecting an operating system or application inside the monitor. The project still needs approved wiring, airflow, mounting clearances and peripheral ownership. Screen layout should be tested at the real viewing distance with the people who will use it.
Select Full HD or UHD before Interface Approval
| ZXTLCD-EN270BWFS Specifications of 27-Inch Embedded Industrial Display | ||||
| LCD Panel Parameters | Screen Size | |||
| Display Area | 476.5 mm (Height) X 268 mm (Width) | |||
| Aspect Ratio | 16 : 9 | 16 : 9 | ||
| LCD Type | a-Si TFT-LCD Monitor | a-Si TFT-LCD Monitor | ||
| Maximum Resolution | 1920 X 1080 | 3840 X 2160 | ||
| Display Color | 16.7m , 99% sRGB | 1.07B , 95% DCI-P3 | ||
| Brightness | 300cd/m² | 400cd/m² | ||
| Contrast Ratio | 1000 : 1 | 1000 :1 | ||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | 89°/89°/89°/89°(Type)(CR≥10) | ||
| Response Time | 14ms | 14ms | ||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 45 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Accessories | Power Cord Length | 1.5m | ||
| HDMI Cable Length | 2m | |||
| USB-A to USB-B Cable Length | 1.5m | |||
| Stereo Speaker Size with Connector | 99*45*20 mm | |||
| Stereo Speaker Length | 1.5m | |||
| Package Size | Device Dimensions | 651.4 X 389.6 X 58.9 mm. | ||
| Net Weight | 10 Kilogram | |||
| Package Size | 72 X 47 X 15Centimeter | |||
| Gross Package Weight per Unit | 11 Kilogram | |||
Workstation output
The documented 27-inch LCD provides 1920 × 1080 or 3840 × 2160 resolution, 300 or 400 cd/m² brightness and 1000:1 contrast. The display requires an external laboratory workstation supplied separately. Available connections include HDMI, VGA and DVI video inputs plus USB Type-B connection. Maximum power consumption is 45 W, while the listed device dimensions are 651.4 × 389.6 × 58.9 mm. These values must remain tied to the approved configuration because options shown in the same table are not automatically combined.
The numbers describe the base hardware rather than a finished business system. Application performance depends on the external computer, graphics output, software and connected equipment. Video input selection should be documented clearly. Procurement documents should repeat the approved option set instead of copying every alternative from the specification table.
Match the Monitor to the Workstation Output
Panel option
A stable installation begins by matching the host resolution and video output to the display. The team should test startup order, signal loss, sleep and wake behavior and recovery after the host restarts. Open administrator access and undocumented changes create avoidable support work.
Desk integration
The specification documents an input-driven display rather than built-in computing; analysis and instrument control remain on external systems. Product title, sales copy, drawings, software scope and bill of materials should describe the same finished capability. This protects both the buyer and integrator from assuming that an application, certification or peripheral is included when it is not.
Keep Analysis and Instrument Control External
Mechanical integration drawings should identify the front opening, fixing points, rear depth, ventilation path, power route, video routes, connector access and removal clearance. A scanner, printer, reader, camera or payment module should be documented and serviced independently instead of becoming inaccessible behind the panel.
The displayed interface also needs realistic testing. Long labels, multilingual content, invalid entries, unavailable records and interrupted connections reveal more than a perfect demonstration. Buttons, warning states and confirmation steps should remain readable without requiring users to understand the internal system.
Test Signal Loss and Display Recovery
Cable access
The first 27-inch industrial LCD monitor should be treated as an engineering sample. Acceptance can record signal acquisition, native resolution, sleep recovery, cable retention. The team should also confirm that no product model appears in customer-facing marketing text.
A representative workflow should run from the opening screen to the final confirmation or exception. Measure task time, repeated actions, staff assistance and recovery steps. Findings can be corrected in the host software and cable plan or fixture before volume production, when changes remain inexpensive.
ZXTLCD can review the screen option, host output, workflow, mounting drawing, peripherals, quantity and operating conditions before production. For repeat 27-inch industrial LCD monitor projects, the approved sample record helps purchasing, engineering and after-sales teams keep the panel, input board and cables, connectors and mechanics consistent.
Handover records should include the host resolution and video input, connector map, drawing revision and replacement procedure. This gives future batches and spare units a practical reference without turning the product page into a promise of unsupported functions.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.