Give Rental Users a Clearer Equipment Overview
The purchase case for a open frame industrial monitor begins with a clearly defined information gap. In indoor rental-equipment interfaces and return-status stations, this 21.5-inch product can present product availability, rental instructions and return status from a separately selected host computer. The project retains an external host, allowing software and data architecture to be selected independently.
Full HD space allows availability, item details and return instructions to remain visible together, while the 3000:1 contrast supports a clear indoor interface. A focused screen is easier to operate than a generic dashboard filled with unused data.
Use Full HD Space for Availability and Instructions
| External Embedded Display Specification 21.5 Inch | ||||
| LCD Panel Parameters | Screen Size | 21.5 Inch | ||
| Display Area | 476.5 mm (Height) X 268 mm (Width) | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | TFT-LCD Monitor | |||
| Maximum Resolution | 1920 X 1080 | |||
| Display Color | 16.7m | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 3000 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89/89/89/89 (Type)(CR≥10) | |||
| Response Time | 6.5ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 45 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 535.9 X 332.5 X 49.95 mm. | ||
| Net Weight | 7 Kilogram | |||
| Package Size | 62 X 42 X 15Centimeter | |||
| Gross Package Weight per Unit | 7.5 Kilogram | |||
Host Computer Responsibility
The 21.5-inch panel is specified with 1920 × 1080 resolution, 250 cd/m² brightness, 3000:1 contrast, 6.5 ms response time and wide viewing specifications. It is designed around an external computer or media source supplied by the project. Connections include HDMI, VGA and DVI video inputs, plus the listed USB Type-B connection. Maximum power consumption is listed at 45 W, and the device dimensions are 535.9 × 332.5 × 49.95 mm. The final signal, cable set and mechanical drawing should be approved together before production.
The production source should be tested for resolution, startup order and recovery after power loss. Interface converters should be avoided where a direct supported input is available, because every additional adapter adds another service point.
Connect the Monitor to the Chosen Host
Input Devices
The table does not establish a complete moisture, impact or touch specification. Those legacy-title claims require separate project documentation and must not be assumed for the base monitor. Confirmed specifications must remain separate from optional enclosure or interaction features.
Trials should include missing video, disconnected cables, invalid input and long operating periods. These less attractive cases reveal practical support needs that a perfect demonstration does not show.
Design the Finished Enclosure around Real Service Needs
Front Opening and Rear Access
Front opening, chassis depth, airflow, connector access and removal direction should be resolved in the host drawing. The installation should allow the display to be exchanged without dismantling unrelated equipment.
Cleaning and environmental protection depend on the completed assembly. The panel specification alone does not establish resistance to moisture, chemicals, impact or exposed exterior conditions.
Pilot the Rental Flow before Wider Installation
Return Workflow
A pilot open frame industrial monitor should run through representative content and the busiest workflow. Reading time, corrections, staff interventions and fault recovery provide evidence for improving the installation before more units are manufactured.
Project documents should retain the display specification, input choice, cable map, host output and approved drawing. This becomes the reference for factory inspection and future replacement.
ZXTLCD can review the application, host signal, mounting drawing, connector access, quantity and installation conditions before production. For repeat open frame industrial monitor projects, a retained sample record helps equipment builders and distributors keep the panel, inputs and mechanics consistent across later deliveries. The review can also identify whether the proposed video source, cable length, input selection and power sequence need additional testing before the surrounding cabinet enters production. This reduces avoidable changes during site commissioning and gives service teams a clearer reference for future troubleshooting and replacement planning.
Long-term support is easier when responsibility is documented for display hardware, host, application, network and attached controls. A wiring record and known-good test source help local teams diagnose one layer at a time instead of replacing several components together.
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product, then please do not hesitate to send us a inquiry and contact our sales team now.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.