Put Production Information at the Workstation
A self service terminal on a production floor can reduce unnecessary travel between a machine and a central office. This 18.5-inch Android panel provides a 1920 × 1080 screen for job queues, standard operating procedures, quality checks, downtime reasons and shift messages. The widescreen layout is useful when an operator needs to view a process graphic beside task details or place large action controls below a status summary.
The panel has a 409.8 × 230.4 mm active area, 1200:1 contrast ratio and wide 89-degree viewing angles. These specifications support clear presentation from standing positions around a workstation. The listed brightness is 250 cd/m², making the unit more appropriate for indoor factories and protected equipment than sunlit outdoor installations.
Select the Android Platform Around the Workload
The available embedded boards give integrators two starting points. An RK3288 configuration includes 2 GB RAM, 32 GB storage and Android 10. An RK3568 configuration includes 4 GB RAM, 32 GB storage and Android 11. A lightweight dashboard may not require the same resources as an application displaying several live data panels, so software testing should guide the selection.
Gigabit Ethernet can connect the self service terminal to an approved production network. Depending on the board, wireless support includes 2.4 GHz Wi-Fi or dual-band Wi-Fi 6, plus Bluetooth 4.2 or Bluetooth 5. USB 2.0 and OTG connections provide options for compatible accessories. Any barcode reader, operator badge device or external controller should be checked for Android driver support and power requirements.
| 18.5-Inch External Embedded Android Industrial All-in-One Computer Specifications | ||||
| LCD Panel Parameters | Screen Size | 18.5 Inch | ||
| Display Area | 409.8 mm.(Height) X 230.4(Width)mm. | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1920 X 1080 | |||
| Display Color | 16.7m , 72% NTSC | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 1200 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 14ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio parameters | Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Built-in Android PCB Configuration (Choose one of two) | CPU | Quad-Core RK3288, 1.8GHz | Quad-Core RK3568,2.0GHz | |
| GPU | Mali-T764 | Mali-G52 | ||
| RAM | 2GB | 4GB | ||
| ROM | 32GB | 32GB | ||
| Android System | Android 10.0 | Android 11 | ||
| Ethernet | 1 x RJ45, 1,000 Mbps | Ethernet 1,000 Mbps | ||
| Wireless Internet | 2.4Gigahertz | 2.4Gigahertz/5Gigahertz, Wi-Fi 6 | ||
| Bluetooth | 4.2 | 5 | ||
| Interface | USB2.0 x 2 | OTG USB2.0 x 1 | ||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 30 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 470.9 X 294.9 X 56.7 mm | ||
| Net Weight | 6.5 Kilogram | |||
| Package Size | 55 X 38 X 17Centimeter | |||
| Gross Package Weight per Unit | 7 Kilogram | |||
Installation in an Industrial Cabinet
The unit measures 470.9 × 294.9 × 56.7 mm and weighs approximately 6.5 kg. Machine builders can use these figures to plan the opening, rear clearance, bracket strength and cable routing. The integrated stereo audio system can deliver alarms or spoken guidance where the production policy allows it.
Input power is 100–240 V AC, maximum consumption is 30 W and standby consumption is below 1 W. The specified operating range is 0°C to 50°C. If the site contains metal dust, oil mist, heavy vibration or frequent washdown, the complete cabinet must provide suitable protection because no enclosure rating for those hazards is listed.
Practical Support Before Volume Production
The self service terminal can also support standardized work across several lines when the application and mounting position remain consistent. Operators should be able to recognize the same navigation pattern even when production content changes. During the pilot, the manufacturer can compare completion time, error recovery and readability between shifts. These observations provide practical evidence for refining the self service terminal before it becomes part of daily production.
ZXTLCD can review the mounting plan, required Android version, network method and peripheral list with the buyer. A sample-stage test lets the project team verify dashboard performance, screen layout and operator reach before releasing the cabinet design. For repeat orders, the agreed board and configuration can be documented so purchasing and production teams work from the same reference.
FAQ for Factory Dashboard Projects
Can the panel display live production data?
It can run a compatible Android application and connect through Ethernet or supported Wi-Fi. Real-time data behavior depends on the buyer’s software, server and network design.
Is the screen suitable for a washdown area?
No washdown or ingress-protection rating is stated. It should be installed inside a properly sealed enclosure when water, coolant or aggressive cleaning is present.
Which board is better for a complex dashboard?
The RK3568 option provides more listed memory and newer wireless capabilities. Final selection should still be based on testing the actual application and connected peripherals.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.