A Compact Interface for Parking Decisions
A parking self service terminal has only a few seconds to explain what the driver should do next. This 15-inch Android panel provides a 1024 × 768 interface for entry instructions, ticket status, space guidance, permit lookup or payment-stage prompts when external payment hardware is supplied by the integrator. The compact size can fit a gate-side cabinet, staffed garage console or pedestrian payment area without demanding the footprint of a large kiosk.
The 302.9 × 227.1 mm active area gives designers enough room for large buttons and concise instructions. A 1500:1 contrast ratio and wide 89-degree viewing angles help preserve readability when the user is not perfectly centered. Brightness is listed at 300 cd/m², which is suitable for indoor garages and protected locations. Direct outdoor sunlight or open-weather deployment requires a different display and enclosure assessment.
Android Configuration for the Parking Application
The available RK3288 option includes 2 GB RAM, 32 GB storage and Android 10. The RK3568 option includes 4 GB RAM, 32 GB storage and Android 13. The application provider can select the platform according to its supported Android version, graphical workload, remote-management plan and connected accessories.
Gigabit Ethernet supports connection to an approved local parking network. Depending on the board, wireless functions include 2.4 GHz Wi-Fi or dual-band Wi-Fi 6, as well as Bluetooth 4.2 or Bluetooth 5. Two USB 2.0 ports and an OTG interface can be used for compatible peripherals. Ticket printers, scanners, card readers and payment modules are not stated as included components and should be specified separately.
| Embedded Industrial Android System All-in-One Computer Specifications for External Install 15 Inch | ||||
| LCD Panel Parameters | Screen Size | 15 Inch | ||
| Display Area | 302.9 mm.(Height) X 227.1(Width)mm. | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1024 X 768 | |||
| Display Color | 262K/16.2M , 72% NTSC | |||
| Brightness | 300cd/m² | |||
| Contrast Ratio | 1500 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 15ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio parameters | Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Built-in Android PCB Configuration (Choose one of two) | CPU | Quad-Core RK3288, 1.8GHz | Quad-Core RK3568,2.0GHz | |
| GPU | Mali-T764 | Mali-G52 | ||
| RAM | 2GB | 4GB | ||
| ROM | 32GB | 32GB | ||
| Android System | Android 10.0 | Android 13.0 | ||
| Ethernet | 1 x RJ45, 1,000 Mbps | Ethernet 1,000 Mbps | ||
| Wireless Internet | 2.4Gigahertz | 2.4Gigahertz/5Gigahertz, Wi-Fi 6 | ||
| Bluetooth | 4.2 | 5 | ||
| Interface | USB2.0 x 2 | OTG USB2.0 x 1 | ||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 25 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 367 X 294 X 56.7 mm. | ||
| Net Weight | 5 Kilogram | |||
| Package Size | 43 X 36 X 17Centimeter | |||
| Gross Package Weight per Unit | 5.5 Kilogram | |||
Build the Cabinet Around Drivers and Service Staff
The unit measures 367 × 294 × 56.7 mm and weighs approximately 5 kg. The finished parking enclosure should position controls within reach, shield the screen from impact and allow service staff to replace cables or peripherals. The integrated stereo speakers can provide prompts, but audio should supplement rather than replace clear visual guidance in a noisy garage.
The panel operates from 100–240 V AC, with maximum power consumption of 25 W and standby use below 1 W. Its operating range is 0°C to 50°C. Gate-side locations that experience moisture, exhaust residue or temperature extremes require an enclosure and thermal plan suited to those conditions.
Support for Parking Equipment Integrators
Parking deployments may use the same hardware in several places but require different screen flows at an entry lane, exit lane and pedestrian area. The self service terminal application can be configured around those roles while the mechanical platform remains consistent. During pilot testing, the contractor should observe approach distance, glare, transaction time and recovery after a network interruption. These checks make the self service terminal easier to operate during peak traffic.
ZXTLCD can review the cabinet drawing, Android application, mounting orientation and interface list before the configuration is finalized. A sample installation lets the buyer test viewing height, software response, network stability and peripheral compatibility. This reduces risk before a parking contractor deploys the same terminal across several entrances or facilities.
FAQ for Parking Access Projects
Does the panel include a payment reader or ticket printer?
No such peripherals are included in the listed specification. They can be integrated by the solution provider after compatibility and power requirements are confirmed.
Can it be installed at an uncovered entrance?
The 300 cd/m² display and lack of a stated weatherproof rating make uncovered outdoor use unsuitable without a separately engineered enclosure and display review.
Which screen content works best for drivers?
Large action buttons, short instructions, strong status colors and a clear confirmation step reduce reading time. The actual interface should be tested from the expected vehicle position.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.