Place Information Where It Is Needed
A successful information kiosk page should begin with the work it supports. For medical equipment status, the 15.6-inch format creates a defined interaction point instead of adding an unfocused screen to the site.
Technicians can view equipment availability, cleaning status and scheduled service tasks near a protected work area. The interface can help staff locate the correct unit before a procedure or maintenance visit.
What Integrators Can Build Around
The original specification identifies a 15.6-inch projected-capacitive touch product with ten touch points, strengthened 3 mm cover glass and wide viewing angles. The embedded Android platform provides a compact base for a purpose-built application, subject to confirmation of processor, memory, storage and operating-system requirements.
Interface designers should use readable controls, clear back and confirmation actions, and visible recovery messages. Ethernet, Wi-Fi, HDMI or USB functions must be confirmed against the selected configuration and planned peripherals rather than assumed from a generic kiosk description.
| Specifications of 15.6-Inch Android Capacitive Touch All-in-One Computer | ||||
| LCD Panel Parameters | Screen Size | 15.6 Inch | ||
| Display Area | 344.16 mm.(Height) X 193.59(Width)mm. | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1920 X 1080 | |||
| Display Color | 16.7M , 72% NTSC | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 700 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 30ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| PCAP Touchscreen Panel Parameters | Touch Pattern | Projected Capacitive Touchscreen Monitor | ||
| Touch Points | 10 Points | |||
| Cover Glass | Morse Glass Size 7 Physically reinforced to prevent explosion | |||
| Glass 3 mm. Optical mount to reduce parallax | ||||
| Glass Transmission | >85% (Higher light transmission depends on glass coating technology For example AR/AG) >85% | |||
| Response Speed | < 6ms | |||
| Touch Accuracy | More than 90% of the touch area ±2 mm | |||
| Touch Method | Inch Stylus | |||
| Output Format | Coordinate Output | |||
| Click Time | Unlimited | |||
| Smallest Touch Size | 5 mm | |||
| Long-lasting Durability | Yes, Available | |||
| Touch Interface | USB | |||
| Operating Temperature and Humidity | Below 10℃ ~ +50℃, ≤ 85%RH | |||
| Storage Temperature and Humidity | Less than 20℃ ~ +60℃, ≤ 90%RH | |||
| Audio parameters | Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ω | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Built-in Android PCB Configuration (Choose one of two) | CPU | Quad-Core RK3288, 1.8GHz | Quad-Core RK3568,2.0GHz | |
| GPU | Mali-T764 | Mali-G52 | ||
| RAM | 2GB | 4GB | ||
| ROM | 32GB | 32GB | ||
| Android System | Android 10.0 | Android 11.0 | ||
| Ethernet | 1 x RJ45, 1,000 Mbps | Ethernet 1,000 Mbps | ||
| Wireless Internet | 2.4Gigahertz | 2.4Gigahertz/5Gigahertz, Wi-Fi 6 | ||
| Bluetooth | 4.2 | 5 | ||
| Interface | USB2.0 x 2 | USB2.0 x 2 | ||
| HDMI IN x 1 | ||||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 30 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 403.9 X 263.9X 56.7 mm. | ||
| Net Weight | 5 Kilogram | |||
| Package Size | 47 X 33 X 17 Centimeter | |||
| Gross Package Weight per Unit | 5.5 Kilogram | |||
Operational Confidence after Installation
This product is not a diagnostic medical device. Cleaning method, isolation, software validation and regulatory requirements belong to the completed equipment design.
Mounting depth, ventilation, cable routing and service access should be reviewed before the cabinet is released. A pilot unit is useful for checking touch targets, screen glare, timeout behavior and the ability of staff to recover from an interrupted workflow.
ZXTLCD works with distributors and system integrators on project-specific hardware review. Buyers can share drawings, quantity, environment and peripheral requirements so the proposed information kiosk configuration reflects the actual installation.
One Common Buyer Question
Is this delivered as a complete information kiosk?
No. It is a touch hardware platform for integration. Cabinet, application software and task-specific peripherals should be listed separately. Buyers should send quantity, installation drawing, environment and peripheral list so ZXTLCD can review a suitable configuration before quotation.
Serviceability Deserves Space in the Design
Allow realistic access to power, network and storage connections. A design that looks clean from the front can still create expensive maintenance if the complete cabinet must be removed for a routine replacement.
Content and Workflow Need Equal Attention
Hardware cannot correct a confusing application. The opening page should make the available task obvious, while secondary information remains easy to reach without competing with the primary action. Buttons should be sized for the intended users, error messages should explain the next step, and confirmation screens should prevent accidental submission. If several languages are required, the translated interface should be tested rather than fitted into a layout designed only for English.
Network loss and peripheral failure also need visible responses. A frozen loading symbol creates support calls, while a clear offline notice can direct the user to another service route. Integrators should decide what data may be cached, how the application restarts and who receives an alert when the information kiosk cannot complete its assigned task.
Evaluating Total Project Value
Purchase price is only one part of an installed system. Cabinet fabrication, software licensing, integration, site labor, content updates and support all influence the commercial result. A deliberate pilot can reduce expensive changes after multiple enclosures have already been manufactured.
Project buyers should record the approved display, touch, computing and connector configuration alongside photographs and drawings. This creates a useful reference for incoming inspection, replacement requests and later expansion. It also helps ZXTLCD review whether a proposed change affects compatibility, lead time or service planning before the next order is confirmed.
Commercial Handover and Support
The finished project should include a clear ownership map for hardware, application, network and connected peripherals. Installers need the approved drawings, while support teams need configuration records and a simple fault-reporting path. These documents reduce delays when a site requests assistance and help future orders follow the version that was actually tested.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.