Place Job Guidance near the CNC Work Area
The business case for an compact Android panel PC begins with a specific operating gap. In CNC job guidance and maintenance-reference access, this integrated 10.4-inch unit can show job references, tool notes and maintenance prompts in a small protected machine-side fixture. Its purpose is to give the operator a stable local view, not to reproduce every screen from a central management platform.
The compact 4:3 workspace suits short job lists, tool references and service prompts without occupying space required for machine controls. That focus helps equipment builders avoid an overcrowded interface and keeps daily actions easier to learn.
A Compact Format for Lists and Service Prompts
| Android Display Specifications 10.4 Inch | |||
| LCD Panel Parameters | Screen Size | 10.4 Inch | |
| Display Area | 211.2 mm.(Height) X 158.4(Width)mm. | ||
| Aspect Ratio | 16 : 9 | ||
| LCD Type | a-Si TFT-LCD Monitor | ||
| Maximum Resolution | 800 X 600 | ||
| Display Color | 16.7M | ||
| Brightness | 400cd/m² | ||
| Contrast Ratio | 700 : 1 | ||
| Viewing Angle (Up/Down/Left/Right) | 80°/80°/70°/70° (Type)(CR≥10) | ||
| Response Time | 30ms | ||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | ||
| Field Frequency | 60Hertz | ||
| Audio parameters | Audio system | Stereo | |
| Speaker size | ≈ 99 x 45 x 20 mm | ||
| Impedance | 8 Ohm | ||
| Power | 2 x 5 Watt | ||
| Loudness | > 80 Decibel | ||
| Interface | 4-pin connector | ||
| Built-in Android PCB Configuration (Choose one of two) | CPU | Quad-Core RK3288, 1.8GHz | |
| GPU | Mali-T764 | ||
| RAM | 2GB | ||
| ROM | 32GB | ||
| Android System | Android 10.0 | ||
| Ethernet | 1 x RJ45, 1,000 Mbps | ||
| Wireless Internet | 2.4Gigahertz | ||
| Bluetooth | 4.2 | ||
| Interface | USB2.0 x 2 | ||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | |
| Maximum Power Loss | ≤ 15 Watt | ||
| Standby Mode Power Loss | < 1 Watt | ||
| Features | Operating Temperature | 0℃ ~ 50℃ | |
| Storage Temperature | Below 10℃ ~ +60℃ | ||
| Package Size | Device Dimensions | 281.1 X 231.1 X 50 mm. | |
| Net Weight | 2 Kilogram | ||
| Package Size | 33.5 X 18.5 X 15 Centimeter | ||
| Gross Package Weight per Unit | 2.5 Kilogram | ||
Job Data
The 10.4-inch LCD is specified with 800 × 600 resolution, 400 cd/m² brightness, 700:1 contrast and the listed viewing-angle specification. The built-in Android configuration uses RK3288 with 2 GB RAM, 32 GB storage and Android 10 as documented. Available connections include Gigabit RJ45, 2.4 GHz Wi-Fi, Bluetooth 4.2 and two USB 2.0 ports. Maximum power consumption is listed at 15 W, while device dimensions are 281.1 × 231.1 × 50 mm. The selected option should be confirmed on the approved configuration sheet and drawing.
The chosen board must be tested with the production application, security policy and expected data load. Automatic login, application relaunch, cache behavior and updates should be agreed before site delivery.
Keep the Android Configuration Purposeful
Input and Scanner Choice
The product must not be treated as the CNC safety controller. The detailed table also does not provide touch-panel parameters, so operator input needs confirmation. Confirmed base specifications should remain separate from enclosure-level or optional functions.
Software trials should include unavailable data, invalid input, disconnected networking and restart recovery. These cases reveal more about daily support requirements than a perfect demonstration page.
Map the Boundary with CNC Controls
Mounting Clearance
The host drawing should resolve front opening, chassis depth, ventilation, cable bend radius and removal direction. Connected devices must remain accessible and replaceable after installation. Cleaning and environmental protection depend on the completed assembly, not the computer chassis alone.
Pilot with Operators before Cutting the Fixture
A pilot compact Android panel PC should run through the busiest representative shift. Operators can record task time, corrections, questions and recovery steps, then improve the application before multiple units are manufactured.
Project records should include the Android board, memory, storage, operating-system image, panel specification, connector map and approved drawing. This becomes the reference for factory inspection and later replacement.
Support Repeat Equipment Builds
ZXTLCD can review software workload, configuration, mounting drawings, quantity and connector access before production. This gives equipment builders, distributors and software integrators a common reference while keeping application, certification and complete-system responsibilities clearly assigned. For a repeat compact Android panel PC program, the reviewed sample and configuration record also help purchasing teams compare later deliveries against the hardware and integration decisions originally approved.
Long-term support is easier when ownership is documented for hardware, software, network, data and peripherals. A retained recovery image and wiring plan help local teams diagnose one layer at a time. They also support expansion without repeating the original integration decisions.
Commercial approval should cover the sample test result as well as appearance. A shared configuration record reduces ambiguity between the buyer, software partner, cabinet builder and factory when production or commissioning occurs on different schedules.
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product, then please do not hesitate to send us a inquiry and contact our sales team now.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.