Bring Diagnostic Results onto the Equipment
Mobile diagnostic products have little space for a screen, battery, specialist electronics and service access. A 10.1-inch industrial display provides a concise visual component for results, equipment status and guided procedures on carts or compact instruments. Two documented panel options allow the project to balance content detail and brightness requirements without turning the display into an unsupported environmental claim. The customer retains its approved diagnostic host and software, while the equipment builder gains a cleaner place to present the information.
The 10.1-inch industrial display helps compact equipment makers present specialist functions through hardware that feels designed for the task. A diagnostic cart or instrument can carry the supplier’s visual identity while the approved host continues to run the validated application. Customers can test the display with real results and working distance before approving a batch. That makes the purchase discussion more concrete and helps the manufacturer preserve one recognizable interface across related service products, training units or distributor demonstrations.
Select the Panel Detail the Application Requires
| ZXTLCD-EN101B Embedded LCD Display 10.1 inches | ||||
| LCD Panel Parameters | Screen Size | 10.1 Inch | ||
| Display Area | 216.58 mm.(Height) X 135.36(Width)mm. | |||
| Aspect Ratio | 16 : 9 | 16 : 10 | ||
| LCD Type | a-Si TFT-LCD Monitor | a-Si TFT-LCD Monitor | ||
| Maximum Resolution | 1280 X 800 | 1920 X 1200 | ||
| Display Color | 16.7M, 50% NTSC | 16.2M , 50% NTSC | ||
| Brightness | 400cd/m² | 1000cd/m² | ||
| Contrast Ratio | 900 : 1 | 1000 :1 | ||
| Viewing Angle (Up/Down/Left/Right) | 85°/85°/85°/85° (Type)(CR≥10) | 80°/80°/80°/80° (Type)(CR≥10) | ||
| Response Time | 30ms | 30ms | ||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 15 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Accessories | Power Cord Length | 1.5m | ||
| HDMI Cable Length | 2m | |||
| USB-A to USB-B Cable Length | 1.5m | |||
| Stereo Speaker Size with Connector | 99*45*20mm | |||
| Stereo Speaker Length | 1.5m | |||
| Package Size | Device Dimensions | 254.5 X 173.5 X 47 mm. | ||
| Net Weight | 2 Kilogram | |||
| Package Size | 32 X 26 X 15Centimeter | |||
| Gross Package Weight per Unit | 4 Kilogram | |||
Two documented panel options
At 10.1 inches, the display offers 1280 × 800 or 1920 × 1200 space for mobile diagnostic visualization. The best result comes from testing the buyer’s real content, distance and enclosure instead of evaluating resolution alone. The original table remains the reference for exact technical decisions.
A mobile service application may show test results, connection status, procedure steps and reference values on one focused page. The documented 1280 × 800 and 1920 × 1200 choices give developers two content-density paths for the equipment design. Brightness options are also listed, but exposed exterior suitability is not established by brightness alone. Sample testing should use the real host, cable route and viewing position so that the chosen panel supports the diagnostic workflow without creating unsupported expectations.
Keep Computing in the Approved Diagnostic Host
A focused display component for specialist systems
The screen works with a separately selected computer or media source. Keeping that scope clear prevents customers from expecting an operating system or application inside the monitor. The display supplier and system integrator can each retain a defined role in the finished project.
Create a Cleaner Mobile Service Product
Diagnostic-equipment manufacturers can use one approved screen design across related carts or service instruments while adapting the software to each procedure. A physical sample helps sales teams demonstrate the actual workflow and gives engineers evidence for mechanical approval. Local distributors can add commissioning, training and after-sales support. This creates a stronger product proposition than an improvised tablet and gives customers confidence that the visible interface can be supplied again when more units or replacement equipment are required.
ZXTLCD can discuss the mobile diagnostic visualization project around the real enclosure, visible finish, logo, mounting relationship and connector access. A branded or application-ready sample gives purchasing, engineering and sales teams the same physical reference for evaluation. Once fit, appearance and selected configuration are approved, that reference can support repeat manufacturing, distributor demonstrations and later replacement or expansion orders.
Configuration Support for Compact Equipment Builders
Equipment manufacturers and integrators can discuss the intended application directly with ZXTLCD before a production order is arranged. The review can include project drawings, expected quantity, visible appearance and the exact hardware configuration. Building and testing a representative sample gives sales, engineering and procurement teams one agreed product to examine. After approval, controlled repeat supply helps distributors support demonstrations, customer expansion and replacement requirements without rebuilding the specification from the beginning.
The 10.1-inch industrial display can carry the buyer’s application or media into a more professional finished installation while keeping unsupported functions out of the product promise. By testing real content, signal source and mechanical fit at sample stage, the customer gains a clearer expectation of what will be supplied and a stronger basis for repeat purchasing.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.