Put Inspection Criteria Beside the Product
Quality decisions become less consistent when operators rely on printed sheets that are difficult to update. Self service devices installed at an inspection station can present current criteria, approved reference images, defect categories and record-entry screens. The 17-inch panel gives the interface useful vertical space for a checklist and confirmation area without requiring a large cabinet.
The screen has a 337.92 × 270.34 mm active area and a 1280 × 1024 resolution. Wide 89-degree viewing angles allow an operator and supervisor to review the same information. Brightness is listed at 250 cd/m² for indoor production areas. No waterproof or high-brightness capability is established by the table.
Flexible Video Inputs for Factory Computers
HDMI, VGA and DVI connections support a mixture of newer and legacy sources. A manufacturer can add self service devices to existing lines without assuming every control computer has the same output. The display does not include an operating system, quality software or database connection; those remain with the buyer’s external computer and application.
The USB interface should be confirmed for the requested function because no complete touch specification is provided. Optional 2 × 5 W audio may support alerts or guided instructions. A noisy production line should still use clear visual status as the primary communication method.
| Specifications of 17-Inch External Embedded Industrial Display | ||||
| LCD Panel Parameters | Screen Size | 17 Inch | ||
| Display Area | 337.92 mm.(Height) X 270.34(Width)mm. | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1280 X 1024 | |||
| Display Color | 16.7M , 72% NTSC | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 1200 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 20ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 30 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 400.6 X 338.6 X 56.7 mm. | ||
| Net Weight | 5.5 Kilogram | |||
| Package Size | 48 X 39 X 15 Centimeter | |||
| Gross Package Weight per Unit | 6 Kilogram | |||
Build a Station That Can Be Maintained
Dimensions are 400.6 × 338.6 × 56.7 mm, with a net weight of approximately 5.5 kg. The cabinet should protect signal cables, provide a secure mount and allow technicians to replace connections without disturbing measuring tools. The installation angle must keep defect images and text readable at the operator’s normal position.
The display accepts 100–240 V AC, consumes up to 30 W and uses less than 1 W in standby. Its operating range is 0°C to 50°C. Dust, vibration, coolant and impact requirements need to be handled by the complete station.
Document the Approved Inspection Configuration
ZXTLCD can review the source signal, mounting drawing and optional interfaces with machine builders. A sample allows inspectors to test real forms, reference images and restart behavior. Recording the approved self service devices configuration gives production, purchasing and maintenance teams the same reference when additional lines are equipped.
Quality Station FAQ
For repeat production lines, the buyer can maintain one approved sample and a configuration record covering signal type, cable orientation, mounting dimensions and optional interfaces. This reference helps incoming inspection and makes it easier to determine whether a replacement screen matches the station already validated by operators.
Inspection teams should test the interface with typical defects and borderline examples, not only ideal images. The station needs to make the current product, inspection step and result unmistakable. If a record cannot be submitted, the operator should receive a clear recovery path instead of repeating the inspection without knowing whether the first entry was saved.
Shift handovers are another useful pilot scenario. The self service devices application can close completed work, identify pending inspections and restrict changes to approved users. These functions belong to the external system, but their readability and workflow should be validated at the real mounting height. The findings help the machine builder refine screen angle, input placement and service access before additional stations are produced.
Does the display identify defects automatically? No. Inspection logic and image analysis depend on the connected computer and software.
Can a camera be connected directly? Camera compatibility is not stated. The system integrator should route camera data through an approved computer or controller.
Is the monitor suitable for washdown? No washdown rating is listed. A sealed enclosure is required for wet processes.
—
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.