Present Community Notices in a Consistent Order
The purchase case for an industrial open frame monitor begins with a clearly defined information gap. In indoor community notices and facility-information boards, this 19-inch product can display announcements, service contacts and scheduled activities from a separately managed content source. The project retains an external host, allowing software and data architecture to be selected independently.
The 5:4 format gives notices and vertical event lists more usable height than a typical entertainment screen, supporting a calmer reading order. A focused screen is easier to operate than a generic dashboard filled with unused data.
Use Vertical Space for Events and Service Contacts
| External Embedded Display Specification 19 Inch | ||||
| LCD Panel Parameters | Screen Size | 19 Inch | ||
| Display Area | 376.32 mm.(Height) X 301.06(Width)mm. | |||
| Aspect Ratio | 4 : 3 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1280 X 1024 | |||
| Display Color | 16.7m , 73% NTSC | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 1000 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 14ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 30 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Package Size | Device Dimensions | 436.5 X 364.5 X 50 mm. | ||
| Net Weight | 6.5 Kilogram | |||
| Package Size | 52 X 44 X 15 Centimeter | |||
| Gross Package Weight per Unit | 7 Kilogram | |||
Media Player
The 19-inch panel is specified with 1280 × 1024 resolution, 250 cd/m² brightness, 1000:1 contrast, 14 ms response time and wide viewing specifications. It is designed around an external signage player or computer chosen for the content platform. Connections include HDMI, VGA and DVI inputs, plus the listed USB Type-B connection. Maximum power consumption is listed at 30 W, and the device dimensions are 436.5 × 364.5 × 50 mm. The final signal, cable set and mechanical drawing should be approved together before production.
The production source should be tested for resolution, startup order and recovery after power loss. Interface converters should be avoided where a direct supported input is available, because every additional adapter adds another service point.
Select the Content Player Independently
Update Responsibility
No complete ingress rating or built-in operating system is listed. The product is a monitor component and should be installed indoors or inside a separately engineered protected enclosure. Confirmed specifications must remain separate from optional enclosure or interaction features.
Trials should include missing video, disconnected cables, invalid input and long operating periods. These less attractive cases reveal practical support needs that a perfect demonstration does not show.
Plan Reading Distance, Reflections and Cabinet Access
Mounting and Ventilation
Front opening, chassis depth, airflow, connector access and removal direction should be resolved in the host drawing. The installation should allow the display to be exchanged without dismantling unrelated equipment.
Cleaning and environmental protection depend on the completed assembly. The panel specification alone does not establish resistance to moisture, chemicals, impact or exposed exterior conditions.
Review Content Ownership before Launch
Accessibility
A pilot industrial open frame monitor should run through representative content and the busiest workflow. Reading time, corrections, staff interventions and fault recovery provide evidence for improving the installation before more units are manufactured.
Project documents should retain the display specification, input choice, cable map, host output and approved drawing. This becomes the reference for factory inspection and future replacement.
ZXTLCD can review the application, host signal, mounting drawing, connector access, quantity and installation conditions before production. For repeat industrial open frame monitor projects, a retained sample record helps equipment builders and distributors keep the panel, inputs and mechanics consistent across later deliveries. The review can also identify whether the proposed video source, cable length, input selection and power sequence need additional testing before the surrounding cabinet enters production. This reduces avoidable changes during site commissioning and gives service teams a clearer reference for future troubleshooting and replacement planning.
Long-term support is easier when responsibility is documented for display hardware, host, application, network and attached controls. A wiring record and known-good test source help local teams diagnose one layer at a time instead of replacing several components together.
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product, then please do not hesitate to send us a inquiry and contact our sales team now.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.