Turn Work Instructions into an Interactive Station
Printed instructions quickly become outdated and cannot record completion. A 15.6-inch industrial touch screen gives indoor assembly cells, quality stations and food-production information terminals a better way to show step-by-step media and confirmation controls without occupying the space of a large workstation. Operators receive guidance where the work happens, and manufacturers gain a reusable display platform for training, quality prompts and production communication.
Full HD Space for Images, Steps and Checks
The 15.6-inch panel provides 1920 × 1080 resolution and ten-point projected-capacitive touch. Its value is not a long list of numbers repeated from the table; it is the combination of clear information, direct interaction and a format that can become part of the customer’s equipment. The retained specification table gives buyers the exact panel, electrical and mechanical data needed for project review.
| ZXTLCD-EN156BCTWFS Specifications Document for 15.6-Inch Embedded Industrial Capacitive Touch Display | ||||
| LCD Panel Parameters | Screen Size | 15.6 Inch | ||
| Display Area | 344.16 mm.(Height) X 193.59(Width)mm. | |||
| Aspect Ratio | 16 : 9 | |||
| LCD Type | a-Si TFT-LCD Monitor | |||
| Maximum Resolution | 1920 X 1080 | |||
| Display Color | 16.7M , 72% NTSC | |||
| Brightness | 250cd/m² | |||
| Contrast Ratio | 700 : 1 | |||
| Viewing Angle (Up/Down/Left/Right) | 89°/89°/89°/89° (Type)(CR≥10) | |||
| Response Time | 30ms | |||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| PCAP Touchscreen Panel Parameters | Touch Pattern | Projected Capacitive Touchscreen Monitor | ||
| Touch Points | 10 Points | |||
| Cover Glass | Morse Glass Size 7 Physically reinforced to prevent explosion | |||
| Glass 3 mm. Optical mount to reduce parallax | ||||
| Glass Transmission | >85% (Higher light transmission depends on glass coating technology For example AR/AG) >85% | |||
| Response Speed | < 6ms | |||
| Touch Accuracy | More than 90% of the touch area ±2 mm | |||
| Touch Method | Inch Stylus | |||
| Output Format | Coordinate Output | |||
| Click Time | Unlimited | |||
| Smallest Touch Size | 5 mm | |||
| Long-lasting Durability | Yes, Available | |||
| Touch Interface | USB | |||
| Operating Temperature and Humidity | Below 10℃ ~ +50℃, ≤ 85%RH | |||
| Storage Temperature and Humidity | Less than 20℃ ~ +60℃, ≤ 90%RH | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ω | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 30 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Accessories | Power Cord Length | 1.5m | ||
| HDMI Cable Length | 2m | |||
| USB-A to USB-B Cable Length | 1.5m | |||
| Stereo Speaker Size with Connector | 99*45*20mm | |||
| Stereo Speaker Length | 1.5m | |||
| Package Size | Device Dimensions | 383.4 X 243.4X 55.7mm. | ||
| Net Weight | 5 Kilogram | |||
| Package Size | 45 X 32 X 15Centimeter | |||
| Gross Package Weight per Unit | 5.5 Kilogram | |||
Visual confirmation
Visual work instructions can combine photographs, diagrams, checkpoints and confirmation buttons on a Full HD page. Quality stations can use the same surface for inspection prompts and issue reporting. Because the display is linked to an external production computer, the factory retains control over application deployment, user accounts and data integration while the machine face remains compact.
Connect Touch Input to the Production Computer
External computing architecture
This product is a touch monitor, so video and application processing remain in the buyer’s external computer. HDMI, VGA and DVI inputs provide flexibility for established and newly designed systems, while USB carries touch interaction back to the host. This architecture lets integrators retain their preferred operating system, software image and service strategy instead of being tied to computing hardware inside the display.
Digital instructions also give manufacturers more control over how changes reach the production floor. The application can present the latest approved content from the host system, while the screen provides a consistent point of access. That supports clearer training, stronger process communication and a more professional equipment appearance.
Support Operators without Adding Desk Hardware
The documented product scope should guide the final offer. Any protection level, special touch behavior, certification, peripheral or software capability beyond the retained specification table must be confirmed as a separate project requirement. This prevents the display or panel computer from being sold with functions that belong to the customer’s complete system.
For buyers comparing products for visual work instructions, the 15.6-inch industrial touch screen offers value beyond the visible panel. It gives the project a defined interactive component that can be tested with real content, demonstrated to an end customer and carried into a repeatable equipment design. Distributors can combine the hardware with local application support, installation and after-sales service, while manufacturers can use one approved appearance across related products. This creates a clearer quotation and a stronger reason for customers to choose a purpose-built interface instead of adapting a consumer screen. Careful sample review also helps purchasing, engineering and sales teams agree on the same finished result before a larger order is scheduled.
Develop a Consistent OEM Display Program
Sample approval and repeat orders
Production-solution providers can evaluate the panel with their host system and instruction software before volume orders. ZXTLCD can support mechanical review, appearance customization and documented repeat supply for customers building standardized stations across several lines.
ZXTLCD supplies embedded displays and touch products for OEM buyers, distributors and solution providers. Sales and engineering communication can cover the real application, drawing, quantity and optional requirements before production, helping customers move from inquiry to a commercially usable product with fewer assumptions.
Specified correctly, the 15.6-inch industrial touch screen gives solution providers a marketable combination of responsive interaction, clean integration and OEM flexibility.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.