Guide Operators through a Short Instrument workflow
Instrument builders, control-system integrators and industrial equipment distributors can create a complete instrument product around the monitor, including enclosure, software, connected instrument modules and maintenance. A representative sample allows the end customer to test reach and page flow before multiple fixtures are ordered. That approved reference can support future instrument formats and local distributor demonstrations.
Connect Presentation with Action
The 10.1-inch 1280 × 800 panel is a touch monitor, not a computer. Ten-point projected-capacitive touch provides direct input while video content and application processing come from an external host selected by the integrator. That distinction prevents buyers from expecting Android or Windows computing inside the product. Exact display, touch, power, interface and dimensional details remain in the preserved specification table.
Plan the Host Computer and Connected instrument modules Separately
Commercial value continues after installation when the provider can support application changes, replacement planning and expansion. A panel with a clear role is easier to discuss as part of a long-term program than an anonymous screen purchase. The customer gains continuity, while the supplier retains a visible place in the finished solution.
The 10.1-inch PCAP touch monitor gives analyzer builders control over how the display meets the surrounding furniture. Bezel coverage, service access and peripheral placement can be coordinated around the actual unit, producing a cleaner customer-facing result. Because computing comes from an external host, the integrator can select the operating system and performance level required by the service application. A realistic sample allows staff to test page flow and user reach, creating a dependable reference before the same instrument concept is manufactured for additional locations.
| ZXTLCD-EN101BCT 10.1-Inch Embedded Capacitive Touch Display | ||||
| LCD Panel Parameters | Screen Size | 10.1 Inch | ||
| Display Area | 216.58 mm.(Height) X 135.36(Width)mm. | |||
| Aspect Ratio | 16 : 9 | 16 : 10 | ||
| LCD Type | a-Si TFT-LCD Monitor | a-Si TFT-LCD Monitor | ||
| Maximum Resolution | 1280 X 800 | 1920 X 1200 | ||
| Display Color | 16.7M, 50% NTSC | 16.2M , 50% NTSC | ||
| Brightness | 400cd/m² | 1000cd/m² | ||
| Contrast Ratio | 900 : 1 | 1000 :1 | ||
| Viewing Angle (Up/Down/Left/Right) | 85°/85°/85°/85° (Type)(CR≥10) | 80°/80°/80°/80° (Type)(CR≥10) | ||
| Response Time | 30ms | 30ms | ||
| LCD Panel Lifespan (Hours) | 60,000(Hour.) | |||
| Field Frequency | 60Hertz | |||
| PCAP Touchscreen Panel Parameters | Touch Pattern | Capacitive Touchscreen Capacitive Projected | ||
| Touch Points | 10 Points | |||
| Cover Glass | Morse Glass Size 7 Physically reinforced to prevent explosion | |||
| Glass 3 mm. Optical mount to reduce parallax | ||||
| Glass Transmission | >85% (Higher light transmission depends on glass coating technology For example AR/AG) >85% | |||
| Response Speed | < 6ms | |||
| Touch Accuracy | More than 90% of the touch area ±2 mm | |||
| Touch Method | Inch Stylus | |||
| Output Format | Coordinate Output | |||
| Click Time | Unlimited | |||
| Smallest Touch Size | 5 mm | |||
| Long-lasting Durability | Yes, Available | |||
| Touch Interface | USB | |||
| Operating Temperature and Humidity | Below 10℃ ~ +50℃, ≤ 85%RH | |||
| Storage Temperature and Humidity | Less than 20℃ ~ +60℃, ≤ 90%RH | |||
| Audio Parameters (External Speaker Option) |
Audio system | Stereo | ||
| Speaker size | ≈ 99 x 45 x 20 mm | |||
| Impedance | 8 Ohm | |||
| Power | 2 x 5 Watt | |||
| Loudness | > 80 Decibel | |||
| Interface | 4-pin connector | |||
| Onboard Interface | HDMI Input | 1 | ||
| VGA Input | 1 | |||
| DVI Input | 1 | |||
| USB Type B or any desired USB Type | 1 | |||
| Power | Power Supply | Alternating Current 100V~240V, 50/60Hz | ||
| Maximum Power Loss | ≤ 15 Watt | |||
| Standby Mode Power Loss | < 1 Watt | |||
| Features | Operating Temperature | 0℃ ~ 50℃ | ||
| Storage Temperature | Below 10℃ ~ +60℃ | |||
| Accessories | Power Cord Length | 1.5m | ||
| HDMI Cable Length | 2m | |||
| USB-A to USB-B Cable Length | 1.5m | |||
| Stereo Speaker Size with Connector | 99*45*20mm | |||
| Stereo Speaker Length | 1.5m | |||
| Package Size | Device Dimensions | 254.5 X 173.5 X 47 mm. | ||
| Net Weight | 2 Kilogram | |||
| Package Size | 32 X 26 X 15Centimeter | |||
| Gross Package Weight per Unit | 4 Kilogram | |||
Build a Complete Instrument Proposition
ZXTLCD can review the intended application, mounting relationship, visible finish, logo, connector access and quantity before production. A branded sample gives software, engineering, purchasing and sales teams one physical reference. Once appearance, fit and the documented configuration are approved, the same reference can support repeat manufacturing, demonstrations and later expansion. Any special protection, outdoor use, certification or peripheral requirement must be confirmed separately.
Move from Fixture Sample to Repeat Orders
Project teams can use the approved unit during customer demonstrations, internal training and application review. Showing realistic content on the actual panel helps decision makers understand the product’s role and gives local partners a consistent basis for explaining installation, system boundaries and support before final quantities are scheduled.
International distributors can use the same approved sample to prepare localized demonstrations and discuss application scope with operators. This gives the sales process a physical reference, reduces ambiguity between quotations and delivered units, and supports clearer communication when a project later requires another location, replacement hardware or a related product format.
The 10.1-inch PCAP touch monitor gives compact instruments, analyzer consoles and embedded equipment interfaces an integration-ready touch surface for custom fixtures. Testing real content, user reach and the selected system during the sample stage creates a clearer route to approval and gives both ZXTLCD and its partners a dependable foundation for repeat supply.
Fit the Interface to the Furniture
Custom instrument enclosure works best when the interface looks designed into it. The 10.1-inch PCAP touch monitor gives compact instruments, analyzer consoles and embedded equipment interfaces an integration-ready touch surface for custom fixtures. Operators can navigate instrument menus, view application readings and confirm a selected action, while the equipment provider retains control over the enclosure, application and service experience.
A service journey can begin with a small number of categories, request necessary details and end with a visible confirmation. The open-frame format allows the fixture designer to coordinate bezel treatment, height and surrounding surfaces. Payment devices, printers and scanners are chosen as parts of the complete analyzer project.
Request Product Information
If you would like to get the specification about above product, or you hope to discuss your requirements or need any additional information on our this product , then please do not hesitate to send us a inquiry and contact our sales team now.